| Customization: | Available |
|---|---|
| Conditions of Use: |
Car Type, Trailer Type, Marine, Land Use |
| Usage: | Emergency Crew, Standby Unit, Common Units |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
X440 is a half-wave phase-controlled thyristor type Automatic Voltage Regulator and forms part of the excitation system for a brushless generator. In addition to regulating the generator voltage, the AVR circuitry includes under speed and sensing loss protection to ensure safe, reliable control of the generator
The Propose employs surface mount technology (SMT) for high integration of features in a minute footprint AVR. Positive voltage build up from residual levels is ensured by the use of proficient semiconductors in the power circuitry of the AVR. The control and voltage sensing circuits have separate terminals, allowing the excitation power to be resulting directly from the stator winding for necessary applications or from an auxiliary winding if sustained short circuit performance is essential. Which is linked with the main stator windings and the exciter field windings to offer closed loop control of the output voltage with load regulations of +/- 1%
*Stability adjustment
*Under frequency roll off adjustment
* Trim adjustment
* Optimum response selection* Droop adjustment
| SX440 | |||
| Input | Voltage | 190-264V ac | |
| Frequency | 50-60 Hz nominal | ||
| Phase | 1 | ||
| Wire | 2 | ||
| Output | Voltage | max 90V dc at 207V ac input | |
| Current | continuous 4A dc, intermittent 6A for 10 secs | ||
| Resistance | 15 ohms minimum | ||
| Regulation | +/- 1.0% | ||
| Thermal Drift | 0.04% per deg. C change in AVR ambient | ||
| Typical system response | AVR response | 20ms | |
| Filed current to 90% | 80 ms | ||
| Machine Volts to 97% | 300ms | ||
| External voltage adjustment | +/-10% with 1 k ohm 1 watt trimmer | ||
| Under frequency protection | Set point | 95% Hz | |
| Slope | 170% down to 30 Hz | ||
| Unit power dissipation | 12 watts maximum | ||
| Build up voltage | 4 Volts @ AVR terminals | ||
| Analogue Input | Maximum input | ±5V dc | |
| Sensitivity | 1v for 5% | ||
| Input resistance | 1k ohm | ||
| Quadrature Droop Input | 10 ohms burden | ||
| Max. sensitivity: 0.07 A for 5% droop 0PF | |||
| Max. input: 0.33A | |||
| Environmental | Vibration | 20-100 Hz,50mm/se | |
| 100Hz - 2kHz, 3.3g | |||
| Operating temperature | -40 to +70 Deg. C | ||
| Relative Humidity 0-70 Deg. C |
95% | ||
| Storage temperature | -55 to +80 Deg. C | ||
330-25777 Generator Diode Bridge
*Excitation bridge 330-25777, with varistor designed for generator
| Populace | Other brand | |
| Chip | 100% Fully Amper chip | Less than 80% Amper chip |
| Copper | 100% Red Pure Copper | Mixed cooper,Brass |
| Weight | Higher weight | Low weight |
| Life time | Long | Short |
| Performance | Stable, perfect | Change able, easy damage |
| Starting Controller | |
| Semiconductor power devices | All imported IC |
| LCD | Industrial temperature range |
| Adjusting potentiometer | available |
| Chip capacitors | All Japanese TDK |
| Glue | Use of environment-friendly silicone on the surface to form a protective film, moisture corrosion-resistant |
| Other features | After the the strict fully functional and performance testing, and high-temperature aging, each batch of test reliability ratio of 3%.Each board parameters have been rigorously tested and tuned |
Packing
Shock bubble film Suitable goods placing Logistics packaging
){kind=link}