Customization: | Available |
---|---|
Conditions of Use: |
Car Type, Trailer Type, Land Use |
Usage: | Emergency Crew, Standby Unit, Common Units |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
GENERATOR CONTROLLER LOAD SHARE DEEP SEA 8610 DSE8610 is an easy to use Synchronising Auto Start Control Module suitable for use in a multi-generator loadshare system, designed to synchronise up to 32 generators including electronic and non-electronic engines. The DSE8610 monitors the generator and indicates operationalstatus and fault conditions,automatically starting or stopping the engine on load demand or fault condition.
System alarms are annunciated on the LCD screen (multiple language options available), illuminated LED
and audible sounder. The event log will record 250 eventsto facilitate easy maintenance. An extensive number of fixed and flexible monitoring, metering and protection features are included as well as comprehensiv communication and system expansion options. Using the DSE PC ConfigurationSuite Software allows easy alteration of the operational sequences, timers and alarms. With all communication ports capable of being active at the same time, the DSE8610 is ideal for a wide variety of demanding load share applications.
KEY LOAD SHARE FEATURES:
• Peak lopping/sharing (with DSExx60) • Sequential set start
• Manual voltage/frequency adjustment • R.O.C.O.F. and vector shift protection
• Generator load demand • Automatic hours run balancing
• Mains (Utility) de-coupling • Mains (Utility) de-coupling test mode
• Dead bus sensing • Bus failure detection
• Direct governor and AVR control • Volts and frequency matching
• kW and kV Ar load sharing • Dead bus synchronising
KEY BENEFITS
• Compatible in load share systems containing DSE5500, DSE7500 and DSE8600 series. Contact DSE for further details
• 132 x 64 pixel ratio display for clarity
• Real-time clock provides accurate event logging
• Ethernet communication, providesbuil it in advanced remotemonitoring.
• Can be integrated into building management systems (BMS) and programmable logic control (PLC)
• Increased input and output expansion capability via DSENet®
• Licence-free PC software
• IP65 rating (with supplied gasket) offers increased resistance to water Ingress
• Advanced Internal PLC editor allows user configurable functions to meet specific application requirements.
GENERATOR CONTROLLER LOAD SHARE DEEP SEA 8610 DSE8610 | |||
DC SUPPLY | GENERATOR | ||
CONTINUOUS VOLTAGE RATING | 8 V to 35 V Continuous | VOLTAGE RANGE | 15 V - 333 V AC (L-N) |
CRANKING DROPOUTS | Able to survive 0 V for 50 mS | FREQUENCY RANGE | 3.5 Hz to 75 Hz |
MAXIMUM OPERATING CURRENT | 460 mA at 12 V, 245 mA at 24 V | BUILT-IN GOVERNOR CONTROL | |
NOMINAL STANDBY CURRENT | 375 mA at 12 V, 200 mA at 24 V | GAIN VOLTAGE | 0V-10V DC Fully isolated |
CHARGE FAIL/EXCITATION RANGE | 0-35V | OFFSET VOLTAGE | +/- 10 V DC Fully isolated |
OUTPUTS | DIMENSIONS | ||
OUTPUT A (FUEL) | 15 A DC at supply voltage | OVERALL | 98 mm x 79 mm x 40 mm |
OUTPUT B (START) | 15 A DC at supply voltage | PANEL CUT-OUT | 80 mm x 68 mm |
AUXILIARY OUTPUTS C,D | 8 AC at 250 V AC (Volt free) | MAXIMUM PANEL THICKNESS | 8 mm |
AUXILIARY OUTPUTS E,F,G,H,I & J | 2 A DC at supply voltage |