2872769 2894868 3408562 Sensor Casco 700679 Cat 248-2169 320-3046 237-0957 320 3065 335 5321 344-7391 Diesel 23515934 P165-5107

• Conditions of Use: Car Type, Land Use
• Usage: Emergency Crew, Standby Unit, Common Units
• Output Type: AC Three Phase
• Cooling Method: Water Cooling
• Installation Method: Portable
• Generator Type: Diesel Generator
• Model NO.: 3408583 3408515 4306987 3719441 3408562
• Transport Package: Carton Case
• Specification: 13.8*4.2*3.5cm
• Trademark: Baishan Power
• Origin: China
• HS Code: 8503003000
• Production Capacity: 1000pieces/Year

Product Description

*The magnetic speed sensor indicates when ring geat teeth, or other ferrous projections, pass the tip of the sensor.

*Electrical impulses are induced within the coil and sent to the speed control unit.

*The signal from the magnetic speed sensor, teeth per second(HZ), is directly proportional to engine speed. The

 magnetic speed sensor is mounted in the ring gear case or fly wheel bell housing of the engine.

*The threaded hole for the speed sensor should be perpendicular to the centerline of the crankshaft and centered over the ring gear teeth.

*A spot face should be present to provide a flast surface on which to anchor the locknut.

*With the engine stopped, screw the speed sensor in until it touches a gear tooth, then back it out 0.75 of a turn and secure it with the locknut.

*Any ferrous gear may be used as long as the frequency and amplitude of the resulting signal meet the speed control unit specifications.

*The wire leads should be twisted for their entire length from the magnetic speed sensor to the control unit.

*The leads may need shielding if they are longer than 10 ft(3m), or if external interferenceis present.

Do not connect either of the speed sensor leads to anything but the speed control unit used. The shield should not be connected at the speed sensor end.

Item       Pickup Length    Thread Length       Lead Length           Thread Size            Drill Size
MSP675     3.125"                 2.75"                      7.00"                 5/8-18 UNF-2A         37/64
MSP676      5.0"                    4.625"                    12.00"               5/8-18 UNF-2A         37/64

 

Magnetic Speed Sensors are with Wire Leads 

Picu up MSP675  5/8-18UNF-2A

Picu up MSP676  5/8-18UNF-2A

Picu up MSP677  5/8-18UNF-2A

Picu up MSP678  5/8-18UNF-2A

Picu up MSP6729 3/8-24UNF-2A

Picu up MSP6719 5/8-18UNF-2A

Picu up MSP6714 M16x1.5

Picu up MSP6724 3/4-16 UNF

pick up 3034572  5/8-18UNF-2A

 

Packing & Delivery

 
Packing  : Standard export packing, each packed into box then to big carton

 

1. Shock bubble film                                       2. Suitable goods placing                      3. Special logistics packaging

Our Company