Generator Magnetic Speed Sensor Pickup Mpu Msp6729 Engine Parts

• Conditions of Use: Car Type, Land Use
• Usage: Emergency Crew, Standby Unit, Common Units
• Output Type: AC Three Phase
• Cooling Method: Water Cooling
• Installation Method: Portable
• Generator Type: Diesel Generator
• Model NO.: MSP6729
• Transport Package: Carton Case
• Specification: 88*76mm
• Trademark: Baishan Power
• Origin: China
• HS Code: 8503003000
• Production Capacity: 1000pieces/Year

Product Description

*The magnetic speed sensor indicates when ring geat teeth, or other ferrous projections, pass the tip of the sensor.

*Electrical impulses are induced within the coil and sent to the speed control unit.

*The signal from the magnetic speed sensor, teeth per second(HZ), is directly proportional to engine speed. The magnetic speed sensor is mounted in the ring gear case or fly wheel bell housing of the engine.

*The threaded hole for the speed sensor should be perpendicular to the centerline of the crankshaft and centered over the ring gear teeth.

*A spot face should be present to provide a flast surface on which to anchor the locknut.

*With the engine stopped, screw the speed sensor in until it touches a gear tooth, then back it out 0.75 of a turn and secure it with the locknut.

*Any ferrous gear may be used as long as the frequency and amplitude of the resulting signal meet the speed control unit specifications.

*The wire leads should be twisted for their entire length from the magnetic speed sensor to the control unit.

*The leads may need shielding if they are longer than 10 ft(3m), or if external interferenceis present.

Do not connect either of the speed sensor leads to anything but the speed control unit used. The shield should not be connected at the speed sensor end.

5/8-18 UNF Thread Engine Magnetic Speed Pickup Sensor
Product #	Thread Length	Harness Length	Connector	With Mating Connector
MSP674	3in [76.2mm]	High Output 913Ω		No
MSP675	3.19in [81mm]	7in [178mm]	Flying Leads	No
MSP676	5in [127mm]	1ft [0.3m]	Flying Leads	No
MSP677	3in [76mm]			No
MSP678	4.86in [123.4mm]	na		No
MSP679	3in [76.2mm]	na		Yes
MSP6710	4.86in [123.4mm]	na		Yes
MSP6719	2.37in [60.2mm]	1ft [0.3m] Harness	Flying Leads	No
MSP6720	3.86in [98.1mm]	1ft [0.3m] Harness	Flying Leads	No
MSP6721Magnetic Pickup	3.19in [81mm]	2.75in [70mm]	Automotive	No
MSP6721C	3.19in [81mm]	2.75in [70mm]	Automotive	Yes
MSP6722	2.37in [60.2mm]	6in [152mm]	Push-On Terminals	No
MSP6728	3.19in [81mm]	6.25in [159mm]	Packard	No
MSP6728C	3.19in [81mm]	6.25in [159mm]	Packard	Yes
MSP6732	3.16in [80.3mm]	3.25in [82.6mm]	Dual Packard	No
MSP6732C	3.16in [80.3mm]	3.25in [82.6mm]	Dual Packard	Yes

Packing & Delivery

 
Packing  : Standard export packing, each packed into box then to big carton

 

1. Shock bubble film                                       2. Suitable goods placing                      3. Special logistics packaging

Our Company



 

Contacts

Candy Yang(Ms)

 
 
 
 

FAQ

Q: Is our company a trade company or factory?
A: We are manufacturer, we have own factory for AVR, SENSORS, RECTIFIER, CONTROLLER,MOTOR AND GENERATOR SPARE PARTS. This is certified by Made-in-China and our showed photos can prove it. Also we can say we are the International sales department for these products and charge all the business of these products.
 

Q: Are the products original ?
A: Most the goods are replaced type made in china, but can 100% replaced the original one with reliable performance.Except the model marked ORIGINAL.
 

Q: Can you provide the free sample?
A: Usually we didint provide the free sample.But can apply some free sample according to your company qualification.But freight cost should be paid by customer.